All in One Power Programmer Kit: The Ultimate Power Solution for MultiNav Pro+
RFOXiA SuperCapacitor Battery and Programmer Kit
The All in One Power Programmer Kit That Eliminates Every Workflow Bottleneck
If you have ever been mid-session on a field deployment, a drone test flight, or a late-night firmware iteration — and lost power at exactly the wrong moment — you already understand the problem this product solves.
The MultiNav Pro+ Power/Program Kit from RFOXiA is not a battery bank with a USB port stapled to it. It is a purpose-built, engineering-grade all in one power programmer kit designed specifically for the MultiNav Pro+ ecosystem. It combines a professional supercapacitor energy storage system, a high-current charging adapter, an integrated STLink programmer, and a complete cabling solution into a single, cohesive unit.
Nothing like this exists at this price point. And once you understand the technology inside it, you will understand why.
Why Most Power Solutions Fail Hardware Developers
Standard lithium battery packs have three fundamental problems for serious hardware development:
- Slow charge cycles. A 10,000mAh power bank takes 4–6 hours to recharge. If you are running repeated field tests, you are either carrying three battery banks or waiting.
- Degradation over cycles. Lithium batteries lose capacity with every charge cycle. After 300–500 cycles, you are running at 70–80% of original capacity. Supercapacitors do not degrade this way.
- Programmer separation. Most developers carry a separate USB power bank and a separate STLink programmer dongle. Two failure points. Two cable sets. Two things to forget.
The RFOXiA RFOXiA SuperCapacitor Battery and Programmer Kit was engineered to eliminate all three of these problems simultaneously.
The Supercapacitor Advantage: Technology That Changes Everything
The heart of this kit is an 1100F supercapacitor system storing 8800 Joules of usable energy. Those numbers deserve a moment of context.
A standard 10,000mAh lithium power bank stores roughly 36,000 Joules — but delivers it slowly, degrades over cycles, and takes hours to recharge. The supercapacitor system in this kit stores 8800 Joules and delivers it with exceptional stability, zero cycle degradation, and a full recharge time of under 5 minutes.
For hardware developers, this changes the math on field testing completely.
Consider a typical drone firmware testing session:
- Deploy module
- Run test sequence
- Pull data
- Adjust firmware
- Redeploy
With a lithium battery setup, if you drain your power source, you are waiting hours. With the supercapacitor kit, you plug in the charging adapter, get a coffee, come back in five minutes, and continue. The 8800 Joules of stored energy is sufficient to power the complete MultiNav Pro+ module stack — BLE Module, GNSS Module, and Sensors Module together — for a full 24-hour working day.
This is not marketing language. It is physics. The supercapacitor system delivers stable, regulated output voltage without the sag or fluctuation that affects lithium cells under high-current loads. For RF hardware that depends on clean power for transmit power accuracy, this matters.
High-Power Charging: 5 Minutes to Full, Every Time
The kit ships with a 12V 5A high-power charging adapter that drives the supercapacitor bank at 4V 10A during the charge phase. This is why the recharge time is so fast.
A standard USB-C charger operates at 5V 3A maximum — 15 watts. The included adapter pushes 48–60 watts directly into the supercapacitor bank, compressing a multi-hour charge cycle into a 5-minute window.
For developers running iterative field tests, this is the difference between a productive day and a frustrating one. You are never waiting for power. You charge while you review data from the previous session, and by the time you have made your firmware adjustment, the kit is ready to go again.
This charging speed also makes the kit viable for professional deployment scenarios where downtime has real costs — field research stations, remote sensor deployments, UAV operations teams.
All-Day Power for the Complete MultiNav Pro+ Stack
One of the most important capabilities of this kit is its ability to power not just the BLE Module alone, but the entire MultiNav Pro+ module ecosystem simultaneously for a full working day.
That means:
- MultiNav Pro+ BLE Module — long-range wireless at up to 20km man-to-drone range
- GNSS Module — 1.5-meter precision GPS at 18Hz fix rate
- Sensors Module — seven environmental sensors streaming simultaneously
All three running together. All day. On a single 5-minute charge.
This matters because real-world deployments are not single-module. If you are building a drone telemetry system, you need BLE for communication, GNSS for positioning, and sensors for environmental data — all active simultaneously. The power kit was sized and tested for exactly this use case.
For data network contributors using the Sensors Module to earn daily rewards through the RFOXiA ecosystem, this means deploying a node that runs continuously without manual intervention, maximizing uptime and therefore maximizing daily reward earnings.
Integrated STLink Programmer: No More Separate Dongles
This is where the all in one power programmer kit designation earns its name.
The kit integrates a full STLink programmer interface directly into the hardware. This means you can flash firmware to your MultiNav Pro+ BLE Module, run debug sessions, and perform live variable inspection — all from the same device that powers your modules.
For developers using the RFOXiA AI Firmware Builder, this creates a seamless workflow:
- Describe your application in plain language in the Dev Hub
- AI generates complete, production-ready firmware
- Connect your BLE Module to the Power/Program Kit
- Flash the firmware via the integrated STLink
- Power up and test — immediately, from the same device
The integrated STLink supports the STM32WB07 microcontroller at the heart of the MultiNav Pro+ BLE Module. Firmware updates, bootloader access, and live debug breakpoints are all fully supported.
Eliminating the separate programmer dongle removes one of the most common friction points in embedded development: hunting for the right cable, the right adapter, the right driver — before you can even begin your actual work. Here, it is all pre-integrated and pre-tested.
Complete Connectivity Kit: Everything Included, Nothing to Source
The Power/Program Kit ships with the complete cable set required to connect every component:
- Flat ribbon cables for BLE Module to Power Module connection
- Programmer cables for STLink to BLE Module connection
- Charging cables for adapter to supercapacitor bank
Every cable is purpose-built for the MultiNav Pro+ form factor. There is no hunting for the right pinout, no adapters required, no breadboard wiring. Unbox, connect, charge for five minutes, and begin development.
This level of completeness is deliberate. RFOXiA's philosophy is that developers should spend their time building things that matter — not sourcing cables and debugging connector pinouts.
Full Technical Specifications
| Specification | Value |
|---|---|
| Supercapacitor Capacitance | 1100F |
| Energy Storage | 8800 Joules |
| Charge Time | < 5 minutes |
| Runtime (full module stack) | 24 hours |
| Charging Adapter Input | 12V 5A |
| Charging Rate to Supercapacitor | 4V 10A |
| Programmer Interface | STLink (STM32WB07 compatible) |
| Compatible Modules | MultiNav Pro+ BLE, GNSS, Sensors |
| FCC Certification | Yes |
| Price | $119 |
Who Needs This Kit
Drone Builders and FPV Pilots
You are running field sessions where downtime costs hours of travel and setup. A 5-minute recharge between flights means you test more iterations per day. The integrated programmer means firmware adjustments happen in the field, not back at the workbench.
IoT and Embedded Firmware Developers
You need a stable, clean power source for RF development. Battery sag affects transmit power and receiver sensitivity measurements. Supercapacitor output is flat and stable throughout the discharge curve, giving you accurate test conditions every time.
Field Researchers and Environmental Scientists
Deploying Sensors Modules for data collection or data network participation requires all-day runtime without manual intervention. This kit delivers exactly that, charged in minutes at the start of a field day.
Robotics Engineers
Running a robot through test sequences requires consistent power delivery. The 8800J energy storage and flat output curve means your robot's behavior during testing reflects actual operating conditions — not a gradually weakening power supply.
Anyone Building with the Developer Bundle
If you purchased the RFOXiA Developer Bundle, this kit is the power and programming backbone for your entire module stack. It turns a collection of individual modules into a cohesive, field-ready development platform.
How This Kit Fits the RFOXiA Ecosystem
RFOXiA is not a single product. It is a vertically integrated wireless development ecosystem — hardware, AI firmware, mobile control app, data monetization network, and developer community.
The Power/Program Kit is what transforms your module collection from bench hardware into deployed hardware. Without reliable power and seamless programming, even the most capable modules spend more time waiting than working.
With this kit:
- Your BLE modules run all day without interruption
- Your firmware iterations happen in minutes, not hours
- Your field deployments require one charge at the start of the day
- Your data network nodes run continuously, maximizing daily reward earnings
The kit is also the enabling hardware for anyone participating in the RFOXiA data network. Sensors Modules that stream verified environmental data earn daily rewards — but only if they maintain consistent uptime. A 24-hour runtime on a 5-minute charge makes that uptime trivially easy to maintain.
The AI Firmware Development Advantage
One of RFOXiA's most powerful platform features is the AI Firmware Builder integrated into the Dev Hub. Describe your application in plain language — "I want the BLE module to send GPS coordinates every 500ms and alert if the temperature exceeds 40°C" — and the AI generates complete, production-ready STM32WB07 firmware with full source code.
The integrated STLink programmer in this kit is what makes that firmware immediately deployable. The workflow from idea to running hardware can now be measured in minutes:
- Describe your application in Dev Hub AI Firmware Builder
- Download the generated firmware
- Connect BLE Module to Power/Program Kit via ribbon cable
- Flash via integrated STLink
- Power up and observe
For developers used to spending days or weeks on firmware bring-up, this combination of AI generation and integrated programming represents a genuinely new way to work.
FCC Certified and Ready to Ship
Like all MultiNav Pro+ modules, the Power/Program Kit carries FCC certification. This matters for anyone deploying hardware in commercial applications, integrating modules into products for sale, or working in regulated environments.
FCC certification is not a minor detail. It is the primary credential that enables distribution through professional channels — DigiKey, Mouser, Newark — and it is the difference between a maker prototype and a professionally deployable product.
RFOXiA has FCC certification on every module in the ecosystem. The Power/Program Kit is no exception.
Pricing and Availability
The MultiNav Pro+ Power/Program Kit is priced at $119 and is available now through the RFOXiA Club store.
For developers who want the complete ecosystem, the Developer Bundle at $199 includes the BLE Module, GNSS Module, Sensors Module, and Power/Program Kit together — representing significant savings over individual purchases and giving you the complete integrated platform from day one.
New members who sign up for RFOXiA Club receive a $10 welcome credit applicable toward any purchase. Members who complete the platform onboarding funnel accumulate up to $50 in credits applicable toward the Developer Bundle.
Visit the RFOXiA SuperCapacitor Battery and Programmer Kit product page for current availability and to add this kit to your order.
Frequently Asked Questions
Can the Power/Program Kit charge while simultaneously powering the modules? Yes. The supercapacitor system supports pass-through operation, meaning you can charge and power simultaneously during bench development sessions.
Is the STLink programmer compatible with third-party STM32 development tools? Yes. The integrated STLink interface is compatible with STM32CubeIDE, STM32CubeProgrammer, and OpenOCD. Any tool that supports the standard STLink protocol will work with the integrated programmer.
Does the kit work with non-RFOXiA hardware? The power output is configurable and can power other embedded hardware within the voltage and current specifications. The STLink programmer is compatible with any STM32 target. However, the kit is optimized for and tested with the MultiNav Pro+ module ecosystem.
What happens if the supercapacitor fully discharges? Unlike lithium batteries, supercapacitors are not damaged by full discharge. You can fully drain and fully recharge without any cycle life impact. Supercapacitors are rated for 500,000+ charge cycles versus 300–500 for lithium batteries.
Is the 5-minute charge time guaranteed regardless of starting charge level? The 5-minute charge time applies from full depletion to full capacity. Partial charges take proportionally less time.
Conclusion: The All in One Power Programmer Kit That Serious Developers Have Been Waiting For
The MultiNav Pro+ Power/Program Kit is not an accessory. It is infrastructure.
For anyone building with the MultiNav Pro+ ecosystem — whether you are flying drones, deploying field sensors, building robots, or developing IoT products — power management and firmware programming are the two workflow steps that consume the most non-productive time. This kit eliminates both as friction points simultaneously.
1100F supercapacitor system. 8800 Joules. 5-minute recharge. 24-hour runtime. Integrated STLink. Complete cable set. FCC certified. $119.
That combination does not exist anywhere else at this price. This is the all in one power programmer kit that belongs in every serious hardware developer's toolkit.
Get yours now at the RFOXiA SuperCapacitor Battery and Programmer Kit product page and start building without interruption.
Written by: Moamen Mohamed LinkedIn