FCC Power Module Kit That Charges in 5 Minutes and Runs All Day
RFOXiA SuperCapacitor Battery and Programmer Kit
The Only FCC Power Module Kit Built for Serious Wireless Developers
If you have ever lost a field session because your battery died, missed a critical firmware flash because your programmer was incompatible, or wasted half a day waiting on a slow charger, the RFOXiA SuperCapacitor Battery and Programmer Kit was built specifically to solve every one of those problems in a single, certified package.
The MultiNav Pro+ Power/Program Kit is not a generic power bank with a USB port stapled to a breakout board. It is a purpose-engineered, FCC certified power and programming solution designed from the ground up to match the performance demands of the MultiNav Pro+ BLE Module ecosystem. It stores 8,800 Joules of energy inside a 1,100F supercapacitor system, charges completely in under five minutes from a 12V 5A adapter, powers every MultiNav Pro+ module simultaneously for a full working day, and integrates a professional STLink programmer so you never have to carry a separate tool into the field again.
For drone builders, field researchers, IoT engineers, and embedded systems developers who need reliable power and seamless programming access without compromise, this kit changes everything about how you work.
Why Supercapacitors and Not Lithium Batteries?
This is the question every engineer asks the first time they encounter the MultiNav Pro+ Power/Program Kit, and it deserves a thorough answer.
Lithium batteries are energy-dense, widely available, and familiar. They are also slow to charge, sensitive to temperature extremes, subject to capacity degradation over hundreds of charge cycles, and carry meaningful fire and transport risk at higher capacities. For applications where you are deploying hardware repeatedly across days and weeks in field conditions, those limitations compound quickly.
Supercapacitors operate on a completely different physical principle. Rather than storing energy through chemical reactions, they store charge electrostatically. This means:
- Charge and discharge cycles measured in hundreds of thousands, not hundreds
- Charge rate limited only by your charger current, not by chemical kinetics
- No thermal runaway risk under normal operating conditions
- Performance maintained across wide temperature ranges
- No capacity fade over time — the capacitor you use today performs identically five years from now
The tradeoff historically has been energy density — supercapacitors store less energy per gram than lithium cells. But at 1,100 Farads and 8,800 Joules of stored energy, the MultiNav Pro+ Power/Program Kit has crossed the threshold where that tradeoff is completely acceptable for a full-day embedded development workflow. You get the durability and speed advantages of supercapacitor technology without sacrificing the runtime your work demands.
What Is Inside the FCC Power Module Kit
The 1,100F Supercapacitor Battery System
The heart of the kit is the supercapacitor bank. At 1,100 Farads, it stores 8,800 Joules of usable energy — enough to power your complete MultiNav Pro+ module stack for a full working day without interruption.
The charge architecture is equally impressive. Connected to the included 12V 5A adapter, the supercapacitor bank accepts charge at 4V and 10A, meaning a completely depleted bank reaches full charge in under five minutes. In practice, this means your downtime between field sessions is not measured in hours waiting beside a wall outlet. It is measured in the time it takes to walk back to your vehicle, swap a connection, and grab a coffee.
For developers running continuous testing cycles — flash firmware, deploy, test, analyze, repeat — this charge rate is transformative. Traditional lithium-based systems create forced breaks in your workflow. The supercapacitor system adapts to your pace instead of dictating it.
The High-Power Charging Adapter
The included 12V 5A charging adapter is matched precisely to the supercapacitor bank's optimal charge parameters. This is not an afterthought accessory — it is a calibrated component of the system. Using an undersized charger would extend charge times. Using an oversized charger without proper current limiting would stress the capacitor bank. The included adapter hits the exact specification that delivers maximum charge speed safely.
The adapter ships with the kit. You do not need to source a compatible charger separately or research voltage and current compatibility. It works out of the box.
Full-Day Power for All MultiNav Pro+ Modules
The Power/Program Kit is not sized to power just the BLE module in isolation. It is designed to power the complete MultiNav Pro+ ecosystem simultaneously — BLE Module, GNSS Module, and Sensors Module — for a full day of operation.
This matters enormously for integrated development workflows. If you are building a system that combines long-range wireless communication with precision GPS tracking and environmental sensor data, you need all three modules running simultaneously during development and testing. The Power/Program Kit makes that possible without forcing you to juggle separate power sources or compromise on session length.
For field deployments contributing to the RFOXiA data network — where your Sensors Module needs to stream verified GPS-tagged environmental data continuously for maximum reward rates — this all-day runtime is not just convenient. It is directly tied to how much you earn per session.
The STLink Programmer
Embedded in the kit alongside the power system is a fully integrated STLink programmer interface. The STLink protocol is the standard debugging and programming interface for STM32 microcontrollers — including the STM32WB07 at the core of the MultiNav Pro+ BLE Module.
Having the programmer physically integrated with the power system means your development rig is unified. Connect once, and you have power delivery and programming access through the same kit. No hunting for a separate J-Link or ST-Link dongle. No USB power conflicts. No wondering whether your programmer is drawing current from the target device instead of your dedicated power supply.
For developers using the RFOXiA AI Firmware Builder — which generates complete, production-ready STM32WB07 firmware from plain language descriptions — the STLink programmer is the final link in the chain from AI-generated code to flashed hardware. Generate your firmware, connect your programmer, flash. The entire workflow happens inside a single integrated ecosystem.
The Complete Connectivity Kit
The kit ships with every cable you need to connect your MultiNav Pro+ modules immediately. Flat ribbon cables connect the BLE module to the power module and the programmer to the BLE module. Nothing is missing. Nothing requires a separate order.
The flat ribbon design keeps your development rig compact and organized. No rats nest of loose wires. No guessing which connector maps to which header. The connectors are keyed to their interfaces, so you cannot accidentally reverse a connection and risk damaging hardware.
Full Specifications at a Glance
| Specification | Value |
|---|---|
| Supercapacitor Capacity | 1,100 Farads |
| Stored Energy | 8,800 Joules |
| Full Charge Time | Under 5 minutes |
| Charging Input | 12V 5A |
| Charging Rate to Supercapacitor | 4V 10A |
| Runtime (Full Module Stack) | Full working day |
| Programmer Interface | STLink |
| Target MCU | STM32WB07 (MultiNav Pro+ BLE Module) |
| Certification | FCC Certified |
| Included Cables | Flat ribbon cables for all module connections |
| Price | $119 |
Who Needs This FCC Power Module Kit
Drone Builders and FPV Pilots
Long-range drone control with the MultiNav Pro+ BLE Module demands reliable power and the ability to push firmware updates rapidly as you tune your build. The Power/Program Kit keeps your development cycle fast and your test sessions uninterrupted. Five-minute recharge means a dead power bank never cancels a flight session.
Field Researchers and Environmental Monitoring Teams
Deploying sensor nodes in remote locations where wall power is unavailable and logistics are difficult. The all-day runtime covers a complete field day. The fast charge means a portable generator or vehicle power source can top up the bank in minutes when you move between sites.
IoT Developers Building Wireless Systems
Iterative firmware development on STM32WB07 hardware demands rapid flash-test cycles. Having a unified power and programming interface eliminates friction from every cycle. When you are using the RFOXiA AI Firmware Builder to generate and test firmware variants, the bottleneck should be your evaluation time — not your tooling setup.
Data Network Contributors
If you are running a MultiNav Pro+ Sensors Module as a node on the RFOXiA data network, continuous uptime is directly tied to your daily rewards. Nodes that stream verified, complete data for longer sessions earn higher rates. All-day runtime with a five-minute morning charge maximizes your contribution window and your earnings.
Robotics Engineers
Robotics platforms running MultiNav Pro+ modules for long-range communication, precision positioning, or environmental awareness need power systems that match the demands of extended test sessions. The Power/Program Kit's integrated programmer also makes in-place firmware updates possible without disconnecting the robot from its power infrastructure.
Integration With the RFOXiA Ecosystem
The Power/Program Kit is designed specifically as a companion to the MultiNav Pro+ module family. It is not a standalone product attempting to serve every use case — it is precision-engineered to remove the two biggest friction points in MultiNav Pro+ development: power management and firmware deployment.
When combined with the full Developer Bundle — BLE Module, GNSS Module, Sensors Module, and Power/Program Kit — you have a complete wireless development platform. Long-range BLE communication, sub-2-meter GNSS precision, seven-sensor environmental monitoring, all-day supercapacitor power, and integrated STLink programming, unified under the RFOXiA Club platform with AI firmware generation and live data visualization.
The RFOXiA SuperCapacitor Battery and Programmer Kit is available now at $119 with 140 units in stock and ships immediately.
Why FCC Certification Matters for Your Project
Every component in the RFOXiA MultiNav Pro+ ecosystem — including this FCC power module kit — carries FCC certification. For professional developers, researchers, and commercial operators, this is not a checkbox. It is a prerequisite.
FCC certification confirms that the device has been tested to the agency's standards for radio frequency emissions and does not cause harmful interference to other systems operating in the same environment. For a power module that supports active RF hardware, this is meaningful. Poorly designed power supplies generate conducted and radiated noise that degrades receiver sensitivity and corrupts data. The Power/Program Kit's FCC certification tells you it was engineered to play cleanly alongside the sensitive RF frontend of the MultiNav Pro+ BLE Module.
FCC certification also opens doors for commercial deployment. If you are integrating RFOXiA hardware into a product or service that will operate in the United States, working with certified components from the start protects your own certification pathway and satisfies distributor and enterprise buyer requirements.
How to Get Started
The MultiNav Pro+ Power/Program Kit is available directly through the RFOXiA store at $119. If you are building out a complete development platform, the Developer Bundle combines the Power/Program Kit with the BLE Module, GNSS Module, and Sensors Module at a significant discount versus purchasing individually.
New members who sign up for RFOXiA Club receive a $10 welcome credit immediately. Completing the onboarding funnel stages accumulates additional credits that apply directly toward hardware purchases, including the Developer Bundle.
For developers who want to explore the platform before committing to hardware, RFOXiA Club offers free access to the AI Firmware Builder, community Dev Hub, documentation library, and simulated data streaming environment. You can evaluate the full ecosystem before your first purchase.
Get the RFOXiA SuperCapacitor Battery and Programmer Kit and stop letting power and programming friction slow your development cycle down.
Final Thoughts
The best hardware in the world is only as effective as the infrastructure supporting it. The MultiNav Pro+ BLE Module delivers wireless range that no commodity module can approach — but that performance is realized in field sessions, test cycles, and deployed nodes that depend on reliable, long-duration power and fast firmware iteration.
The MultiNav Pro+ Power/Program Kit solves both problems decisively. Eight thousand eight hundred Joules of supercapacitor energy charges in under five minutes and runs your complete module stack all day. The integrated STLink programmer connects your AI-generated firmware directly to your hardware without additional tooling. FCC certification confirms the entire system is engineered to professional standards.
This is not an accessory. It is the foundation of a serious wireless development workflow.
Price: $119 | FCC Certified | 140 units in stock | Ships immediately
Written by: Moamen Mohamed LinkedIn